1-4 Loop Fire Alarm Control Panel With Integrated Vent / Damper Control

The EMTECT MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 onboard sounder circuits, 20 programmable zonal LEDs with slide-in labels, and 25 System LEDs for information purposes. Control buttons for each damper are integrated into the front of the control panel for simple and intuitive manual control of the dampers.

The control panel consists of the latest dual flash-based microprocessor technology combined with a high
resolution, high contrast, graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user operation. Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications from small to large complex multi-area systems.

Fully programmable onsite via the onboard alphanumeric keypad, or PC-NeT configuration software.

PC Software: An extensive suite of user-friendly Windows-based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels. The suite incorporates a number of different programmes to include a configuration, service, logo and virtual panel tool to allow the flexibility of the equipment to be fully explored.

Network: Simply adding a network card allows the panel to communicate with any other MxPro 5 / MxPro 4 fire panel, remote terminal, or network peripherals, such as ipGateway™ or BMS/graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.

  • 20 programmable Zonal / 25 System LEDs.
  • Hochiki protocol support.
  • Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.
  • Dedicated USB & RS232 serial port for direct PC or modem connection.
  • Installer friendly Auto-learn, Loop Detection and Onboard Scope facility for ease of commissioning and fault finding.
  • The graphical display can be configured to operate with virtually any language or character set and allow the installer’s logo to be applied using the Logo application software.
  • Integral P-Bus for system expansion via available option cards.
  • Ad-NeT peer-to-peer network with up to 2000 zones
  • Approved to BS EN54 part 2, 4 and 13.
Specification
Base Technology Dual flash-based processors with real-time clock, trace diagnostics, programmable languages and character sets
Display White backlit 240 x 64 graphical LCD
LED Indicators 22 red (1 x Fire, 1 x More Alarms, 20 x Zonal Programmable), 1 green (Power), 13 amber and 12 bi-colour (Fault & System)
Vent Controls Alpha numeric keypad permitting Navigation, Reset, Mute, Silence, Resound, Evacuate, & 4x Programmable Push buttons
Protocols Hochiki ESP
Number of Fire Zones 2000 (200 per individual panel)
Number of Loops Dedicated 1-4 loop control panel
Devices Per Loop 126
Loop Current 500mA per loop
On-Board Sounder Circuits 4 x 1 Amp programmable
On-Board Relays 2 x 1 Amp 30v AC/DC programmable (10mA, 5v min) - expandable to 4 using MXP-507
Auxilary Supply 1 x 24v 500mA
Programmable Input 1 x monitored programmable input on-board
Programmable Key Switch Inputs 8 volt free inputs
Total Available Output Current 5A maximum available for loop current + sounder outputs + auxiliary supply
Mains Supply 200 - 240v 47-63 Hz AC (+10%, -15% tolerance) 1.4A max
Charger Current 2A temperature compensated
Serial Ports 1 x on-board RS232 connection for PC, modem, IP or portable printer
USB Interface 1 x USB B type connection for PC communication
Programming On-board keypad or PC running Windows tools
Event Log 5000 Event & Diagnostic + 500 Fire
Networking Optional plug in network card (MXP-503 - standard, or MXP-509 - fault-tolerant)
Enclosure / Colour Steel IP30 / RAL7035
Metalwork Options Flushing bezel, battery box, utility enclosure, termination enclosure and rack mount
Approvals EN 54-2:1998, EN 54-4:1998 & EN 54-13:2005
Specification

Base Technology

Dual flash-based processors with real-time clock, trace diagnostics, programmable languages and character sets

Display

White backlit 240 x 64 graphical LCD

LED Indicators

22 red (1 x Fire, 1 x More Alarms, 20 x Zonal Programmable), 1 green (Power), 13 amber and 12 bi-colour (Fault & System)

Vent Controls

Alpha numeric keypad permitting Navigation, Reset, Mute, Silence, Resound, Evacuate, & 4x Programmable Push buttons

Protocols

Hochiki ESP

Number of Fire Zones

2000 (200 per individual panel)

Number of Loops

Dedicated 1-4 loop control panel

Devices Per Loop

126

Loop Current

500mA per loop

On-Board Sounder Circuits

4 x 1 Amp programmable

On-Board Relays

2 x 1 Amp 30v AC/DC programmable (10mA, 5v min) - expandable to 4 using MXP-507

Auxilary Supply

1 x 24v 500mA

Programmable Input

1 x monitored programmable input on-board

Programmable Key Switch Inputs

8 volt free inputs

Total Available Output Current

5A maximum available for loop current + sounder outputs + auxiliary supply

Mains Supply

200 - 240v 47-63 Hz AC (+10%, -15% tolerance) 1.4A max

Charger Current

2A temperature compensated

Serial Ports

1 x on-board RS232 connection for PC, modem, IP or portable printer

USB Interface

1 x USB B type connection for PC communication

Programming

On-board keypad or PC running Windows tools

Event Log

5000 Event & Diagnostic + 500 Fire

Networking

Optional plug in network card (MXP-503 - standard, or MXP-509 - fault-tolerant)

Enclosure / Colour

Steel IP30 / RAL7035

Metalwork Options

Flushing bezel, battery box, utility enclosure, termination enclosure and rack mount

Approvals

EN 54-2:1998, EN 54-4:1998 & EN 54-13:2005

LYFE